What This Cable Does
The Solar Connector to XT90 Cable (3M) connects your solar panels directly to the SuperBase V power station. With support for 12 to 150VDC input, 25A max current, and up to 3000W of charging power, it helps your system charge faster and more efficiently. An important extra: when SuperBase V shuts down after its battery is exhausted, this cable allows it to be automatically awakened once solar input is available — something the Hub 2000 cannot do on its own.
Key Specifications
- Solar Connector to XT90 Cable (3M): Length 3M, Rated Voltage 300V, Rated Current 25A, supports 12 to 150VDC input and up to 3000W charging power. These specs confirm the cable can handle high-power solar arrays and is compatible with SuperBase V's input range.

Solar Connector to XT90 Cable (3M) - Solar Connector to XT90 Cable (3M): When SuperBase V shuts down due to exhausted power, it cannot be awakened by Hub 2000 automatically. Use the included Solar Connector to XT90 Cable to connect the solar panel; it ensures SuperBase V can be automatically awakened when there is photovoltaic input. This feature is critical for off-grid or backup setups where you want the system to resume charging without manual intervention.
Connecting the Cable
Follow these steps to connect your solar panel to SuperBase V. The cable is plug-and-play; no special tools are required.
- 1. Position your solar panel: Place the solar panel in a location with good sunlight. Ensure the panel's output voltage is within the 12-150VDC range supported by the cable.
- 2. Connect the solar connector end: Attach the solar connector (MC4-compatible end) of the cable to your solar panel's output leads. Ensure a firm, weatherproof connection.
- 3. Connect the XT90 end to SuperBase V: Plug the XT90 connector into the corresponding input port on your SuperBase V power station. The connector is keyed; it will only fit one way.
- 4. Verify charging: Once connected, SuperBase V should begin charging automatically. If the unit was previously shut down due to low battery, it will wake up as soon as solar input is detected.
Placement and Cable Management
The 3-meter cable length gives you flexibility to position your solar panel away from the power station while keeping the connection tidy. Avoid running the cable across walkways or sharp edges. If used outdoors, protect the connectors from moisture when not in use.

