Kembali ke Blog
Panduan Cara 2026-11-21 Zendure | The Global Pioneer of Plug-in Home ... 0 dilihat

Cara Menggunakan Zendure Hub 2000 untuk Manajemen Energi Cerdas

Cara Menggunakan Zendure Hub 2000 untuk Manajemen Energi Cerdas

Pelajari cara menyiapkan dan mengoptimalkan Zendure Hub 2000 untuk manajemen energi surya yang efisien, termasuk pemasangan panel, penumpukan baterai, dan kontrol aplikasi.

What the Hub 2000 Does for Your Home Energy

The Zendure Hub 2000 is the central controller in a SolarFlow balcony energy storage system. It takes power from solar panels, routes it to your home via a micro-inverter, and stores excess energy in compatible AB1000 or AB2000 batteries. The dual MPPT design lets you connect two separate solar arrays, each up to 1,000W recommended, for a total solar input of up to 2,400W. This guide explains how to set up and use the Hub 2000 for effective smart energy management.

Hub 2000 Key Specs at a Glance

  • Hub 2000: Two MPPTs, 900W each, 1,800W total. Supports up to 2,400W of solar panels. You can connect two separate panel strings, which gives flexibility for different roof or balcony orientations.
    Hub 2000
    Hub 2000
  • Hub 2000: Dimensions: 363 × 64 × 246 mm, weight ≈ 5.2 kg. Compact enough to mount on a wall or place near your panel array without taking up much space.
  • Hub 2000: Compatible with up to four AB1000 or AB2000 batteries stacked together, for a maximum 7,680Wh storage. You can start small and add more storage later as your energy needs grow.

Setting Up the Hub 2000 for Smart Energy Management

The following steps are based on the supplied product information. Always consult the full manual for safety and installation details.

  1. Check local regulations: Before installing, verify how much power your balcony power plant can feed into your home circuits. Local rules vary.
  2. Connect solar panels to each MPPT: Each MPPT accepts a voltage between 16V and 60V and current up to 32A. For best yield, connect panels in parallel to each MPPT, aiming for about 1,000W per MPPT. This maximizes harvest even in weaker sunlight.
  3. Stack compatible batteries: You can add up to four AB1000 and/or AB2000 batteries. The AB2000 has twice the capacity of the AB1000 and includes self-heating for cold weather down to -20°C. The AB1000 operates only above 0°C.
  4. Connect a micro-inverter: The Hub 2000 works with a micro-inverter (sold separately) to send power to your home. Use the Zendure app to set the amount of power going to the home via the micro-inverter.
  5. Configure via the Zendure app: The app lets you choose how much power goes to your home. Excess solar energy automatically charges the batteries. When solar production drops, the batteries discharge to cover the deficit.

Understanding Power Flow and Storage

The Hub 2000 manages energy automatically once configured. When your solar panels produce more power than your micro-inverter sends to the home, the surplus charges the batteries. When production is lower than the home demand, the batteries discharge to make up the difference. This process happens continuously, helping you use more of the solar energy you generate and reduce your reliance on grid power.

Practical Tips for Optimization

For the best return, pair the Hub 2000 with about 2,000W of solar panels (1,000W per MPPT) and enough battery capacity to store a day's excess production. The supplied information notes a payback cycle of less than 3 years when used with two AB2000 batteries and 2,000W of panels. Start with a single battery if your budget is limited; you can add more later, up to four total.

Artikel Terkait

Customer Service
Beranda
Produk
Keranjang
Profil