Tillbaka till bloggen
Gör-det-själv-guider 2026-11-22 Zendure | The Global Pioneer of Plug-in Home ... 0 visningar

Så här använder du Shelly Pro 3EM-120A med ditt solsystem

Så här använder du Shelly Pro 3EM-120A med ditt solsystem

Learn how the Shelly Pro 3EM-120A smart energy meter integrates with Zendure solar systems for real-time monitoring and intelligent power management.

What the Shelly Pro 3EM-120A Does for Your Solar System

The Shelly Pro 3EM-120A is a DIN-rail-mountable three-phase energy meter designed for professional solar monitoring. It provides real-time data on voltage, current, power, and energy per phase, plus neutral current measurement up to 120A. When paired with Zendure's SolarFlow or AIO systems, it enables intelligent power management that can help maximize your solar savings.

Key Specifications That Matter for Solar Monitoring

  • Shelly Pro 3EM-120A: Measurement accuracy to 1% High accuracy ensures you can trust the energy data for billing, offset calculations, and system optimization.
    Shelly Pro 3EM-120A
    Shelly Pro 3EM-120A
  • Shelly Pro 3EM-120A: Measures up to 120A per phase and the neutral Supports most residential and small commercial solar installations without requiring additional current transformers.
  • Shelly Pro 3EM-120A: Photovoltaic ready Designed to work with solar inverters and net metering setups, making it a natural fit for Zendure solar systems.
  • Shelly Pro 3EM-120A: Stores data in non-volatile memory for up to 60 days in 1-minute intervals You can review historical energy production and consumption even if the network goes down, helping with troubleshooting and trend analysis.

How Shelly Pro 3EM-120A Integrates with Zendure Systems

Zendure's SolarFlow and AIO products can seamlessly connect with Shelly smart home devices for enhanced solar energy utilization. The Shelly Pro 3EM-120A reports accumulated energy and instantaneous voltage, current, and power factor per phase in real time, giving you full visibility into your solar production and home consumption. This data allows Zendure systems to optimize when to store energy, when to use it, and when to draw from the grid.

Installation Overview for Solar Professionals

The following steps summarize the installation process based on the product's specifications. Always refer to the full manual for safety and compliance.

  1. Mount the meter on a DIN rail: The Shelly Pro 3EM-120A is designed for DIN rail mounting. Ensure the rail is securely attached inside your electrical panel.
  2. Connect the power supply: Power supply voltage AC: 110-240 V, 50/60 Hz. Use a dedicated circuit breaker for safety.
  3. Wire the current transformers: Conductor cross section: 0.5 to 2.5 mm² (20 to 14 AWG). Solid, stranded, or bootlace lugs are acceptable. Strip conductors to 6-7 mm (0.24-0.28 in).
  4. Connect to your network: The meter supports Wi-Fi (802.11 b/g/n, up to 30 m indoors) and Bluetooth 4.2. Use the Shelly app or web interface for initial setup.
  5. Integrate with Zendure SolarFlow or AIO: Once the meter is online, it can be linked to Zendure's ecosystem for real-time monitoring and intelligent power management.

What the Shelly Pro 3EM-120A Measures

The meter provides active and apparent power, active and apparent energy, power factor, and fundamental active and reactive energy per phase. It also includes a temperature sensor and phase sequence error detection (optional). This level of detail helps you identify which phase is producing or consuming the most energy, enabling load balancing and efficiency improvements.

Compatibility and Limitations

  • Shelly Pro 3EM-120A: Supported Shelly products for Zendure integration: Shelly Pro 3EM, Shelly 3EM, Shelly Plus Plug S If you already own a Shelly 3EM or Plus Plug S, you can use them together with the Pro 3EM-120A for a comprehensive monitoring setup.
  • Shelly Pro 3EM-120A: The Shelly series products are exclusively joint items and are unavailable for individual purchase You must order the Shelly Pro 3EM-120A together with a Zendure product (e.g., SolarFlow or AIO) to receive it. It will not be shipped if ordered alone.
  • Shelly Pro 3EM-120A: No load threshold: 30 VA per phase The meter requires a minimum load of 30 VA per phase to measure accurately. Very low-power circuits may not register correctly.

Practical Tips for Using the Shelly Pro 3EM-120A

Place the meter in a location where the Wi-Fi signal is strong (within 30 m indoors of your router) to avoid connectivity issues. The ambient temperature range is -20°C to 40°C, so ensure the electrical panel is not exposed to extreme heat or cold. Use the 60-day data storage feature to compare your solar production across different seasons without relying on cloud storage.

Relaterade artiklar

Customer Service
Hem
Produkter
Varukorg
Profil