Category: 配件
產品規格
使用我們優質的 12AWG（4mm2）太陽能延長線，升級您的太陽能設備。每組包含四條電纜（2 紅 + 2 黑），每條長 3 公尺，採用 1000V 鍍錫銅太陽能電纜製成，具備優異的導電性和耐用性。電纜配備 IP67 防護等級的硬質 PPO 塑膠 PV 連接器（30A、1kV），兩端預先安裝公母接頭，可無縫整合。
完美相容
我們的太陽能延長線專為輕鬆安裝而設計，完全相容於 MC4 連接器、PV 配電器和 Y 型連接器。無論您是連接太陽能板、逆變器或電站，這些電纜開箱即可使用，為您節省時間和精力。
輕鬆擴充
透過我們預先安裝的即插即用設計，簡化您的太陽能系統擴充。這些電纜讓您能輕鬆延長或連接各種太陽能元件，包括太陽能模組、逆變器和電池，確保安裝過程順暢且高效。
The 1000V rating gives me peace of mind for my off-grid setup, and the 4mm2 wire feels solidly built. I've used them to bridge a 3-meter gap between my panels and charge controller, and they've held up perfectly through a week of rain.
The tinned copper ends fit snugly into my charge controller’s terminals, and the 3-meter length gave me just enough slack to reroute around the shed. Zero voltage drop noticed so far, even with the full 1000V rating in play.
Ran these out to my ground-mounted panels and the 3-meter length gave me just enough slack to route everything cleanly without kinking. The 1000V rating is reassuring for peace of mind, though I probably didn't need that much headroom. Four cables in the set meant I could wire both strings without b
